Autoglass Repair - Parts List

Share |
Windshield Repair 101 - Kit Supplies and Tools - Pg 2

Home | About

Privacy Policy | Terms of Use

Autoglass Repair - Parts List
Learn how to repair windshields with our free course on Windshield Repair. Know which Windshield Repair Kits are available and which kits fit your repair needs.

Be informed by seeing a comparison of the kits and processes before you begin, and be able to determine whether a windshield can be repaired or needs to be replaced.

These kits are used to repair bullseye, spider web, star, chip, and combination windshield damage. Some kits can repair cracks. See kit comparison chart for specifics.

<< First Page   < Prev Page   |   Next Page >    Last Page >>

Parts List with Descriptions for Syringe Injector Systems:

Windshield-Repair-Adhesive-Seal Adhesive Disc Seal

Special donut shaped Adhesive Disc Seal. This seal is a solid air tight rubber or neoprene disc with adhesive on both sides. It is used to hold the resin delivery device's base, the pedestal, in place during the repair operations. This disc seal is only good for one repair, therefore additional seals are required for multiple repairs

Windshield Repair Pedestal Pedestal

The most common resin delivery device is a pedestal. It acts as a reservoir to hold the resin in place as it is being delivered to the damaged area being repaired. Some pedestals are good for multiple repairs as long as a new adhesive disk is available to hold it in place.

Windshield Glass Repair Resin Glass Repair Resin

These Resin Containers contain a low viscosity UV activated polymer resin. The resin's curing process is activated by exposure to UV light from the sun or UV lamp.
Although UV resins are most commonly used in windshield repairs, some kits contain a two part resin that is mixed before using.

Windshield Repair Push Pin Push Pin

This is a standard pushpin found in most bulletin boards. It will be used as a pointed tool to dig out and remove any loose pieces of glass from the damaged area.
Windshield Repair Safety Razor Blade Safty Razor Blade

A Safety Razor has several functions in the repair process. Its primary function is to remove the pedestal once the rosin has been injected into the damaged area. Its second function is as a squeegee to push air bubbles out from under curing strips, and finally as a scraper to remove any cured resin from the surface of the windshield.

Windshield Repair Safety Razor Holder Safety Razor Holder

You will find that a safety razor holder like this one is a big help when using a safety razor for scraping operations. It also allows the blade to be retracted for safety when not in use and makes the blade much easier to keep up with.

<< First Page   < Prev Page   |   Next Page >    Last Page >>